Model Order Reduction applied to a linear Finite Element model of a squirrel cage induction machine based on POD approach

0 avis

Model Order Reduction applied to a linear Finite Element model of a squirrel cage induction machine based on POD approach

Archive ouverte : Article de revue

Montier, L. | Henneron, T. | Clenet, S. | Goursaud, B.

Edité par HAL CCSD ; Institute of Electrical and Electronics Engineers

International audience. The Proper Orthogonal Decomposition (POD) approach is applied to a linear Finite Element (FE) model of a squirrel cage induction machine. In order to obtain a reduced model valid on the whole operating range, snapshots are extracted from the simulation of typical tests such as at locked rotor and at the synchronous speed. Then, the reduced model of the induction machine is used to simulate different operating points with variable rotation speed and the results are compared to the full FE model to show the effectiveness of the proposed approach.

Langue: Anglais

Date de publication: 2021-03-17

Source: ISSN: 0018-9464

Sujets

Consulter en ligne

Consulter le document

Suggestions

Du même auteur

Finite-Element Model Reduction of Surface-Mounted Permanent Magnet Machines...

Archive ouverte: Article de revue

Al Eit, M. | 2018-09

International audience. This paper presents a methodology that allows taking advantage of the geometrical periodicity of electrical machines together with the modeling of rotor motion. It enables by means of the dis...

Surrogate Model Based on the POD Combined With the RBF Interpolation of Non...

Archive ouverte: Article de revue

Henneron, T. | 2020-01

International audience. The Proper Orthogonal Decomposition (POD) is an interesting approach to compress into a reduced basis numerous solutions obtained from a parametrized Finite Element (FE) model. In order to ob...

Model Order Reduction of Electrical Machines with Multiple Inputs

Archive ouverte: Article de revue

Farzam Far, M. | 2017

International audience. In this paper, proper orthogonal decomposition method is employed to build a reduced-order model from a high-order nonlinear permanent magnet synchronous machinemodel with multiple inputs. Th...

Du même sujet

Electronic devices and circuits / Jacob Millman, Christos C. Halkias

Livre | Millman, Jacob (1911-1991). Auteur | 1967

Noise in electronic devices and systems / M. J. Buckingham

Livre | Buckingham, Michael J. (19..-....). Auteur | 1983

Surrogate Model Based on the POD Combined With the RBF Interpolation of Non...

Archive ouverte: Article de revue

Henneron, T. | 2020-01

Solving Magnetodynamic Problems via Normal Form Method

Archive ouverte: Article de revue

Ugwuanyi, Nnaemeka S. | 2022-03

International audience. Closed-form formulations are difficult to find when the material behavior law is nonlinear. A linear approximation, on the otherhand, has a very narrow range of validity. In this communicatio...

The effect of punching on electrical machine

Archive ouverte: Article de revue

El Youssef, Mohamad | 2019-07-24

International audience. This work enlightens the impact of punching on a specific stator performances. Two specimens type are withdrawn from a M330A35 punched lamination sheet. One type represents a closed magnetic ...

Development and validation of an electrical and magnetic characterization d...

Archive ouverte: Article de revue

Toto Jamil, Meryeme | 2019-07-24

International audience. Claw pole (CP) machine performances are strongly related to the electromagnetic properties of ferromagnetic materials. These properties are impacted by the manufacturing processes, in a heter...

Chargement des enrichissements...