A Novel Five-Phase Fractional Slot Concentrated Winding with Low Space Harmonic Contents

Archive ouverte : Article de revue

Zhao, B. | Gong, J. | Tong, T. | Xu, Y. | Semail, E. | Nguyen, N. -K. | Gillon, F.

Edité par HAL CCSD ; Institute of Electrical and Electronics Engineers

International audience. In this article, a novel five-phase fractional-slot concentrated winding (FSCW) with 20-slot/22-pole is presented. It benefits notonly the advantages of conventional FSCW but also weak space harmonics of magnetomotive force (MMF). The winding allowseliminating the first sub-order harmonic. The new layout of the winding topology is obtained by a combination of stator shifttechnique of the winding in the slots with a special coupling of the windings (star-pentagon), using winding function theory. Thehigh performances of the new winding layout are validated using the finite element method (FEM). Compared to the conventional winding, the winding factor and the total harmonic distortion (THD) of MMF are improved by 1.3% and 2.2%, respectively. With the same injection of current density, the average output torque is increased by 1% and the torque ripple is decreased by 60%.The eddy current losses in the permanent magnets (PMs) at rated speed (600 r/min) and 2100 r/min speed are improved by 67% and 56%, respectively.

Consulter en ligne

Suggestions

Du même auteur

Sensorless Control of a Seven-phase Non-sinusoidal Permanent Magnet Synchro...

Archive ouverte: Communication dans un congrès

Huang, Y. | 2021-12

International audience. This paper presents a sensorless control strategy for seven-phase non-sinusoidal permanent magnet synchronous machine (NSPMSM) with high frequency signal injection (HFSI) method in 5th harmon...

Two-Slot Coil Pitch For Five-Phase Integrated Permanent Magnet Synchronous ...

Archive ouverte: Communication dans un congrès

Cousseau, R. | 2020-08

International audience. This paper presents a simple method to size a concentrated winding permament magnet synchronous machine when a high number of slots is needed. A classical concentrated winding machine leads t...

Correction to “Flux Control Range Broadening and Torque Ripple Minimization...

Archive ouverte: Article de revue

Hoang, Trung-Kien | 2017-05

International audience. I N [1], an error in Fig. 2 in Section II-B is corrected. In the original figure, Fig. 2(b) was exactly the same as Fig. 2(a). The correction is shown here. Fig. 2. RN model of the prototype....

Du même sujet

Design and experimental analysis of a high force piezoelectric linear motor

Archive ouverte: Article de revue

Ghenna, Sofiane | 2023-02

International audience. In this paper, the design and experimental analysis of a piezo-motor for applications requiring compact size, high blocking and driving forces are presented. Mechanical design addresses diffi...

Experimental elastic wave control in a piezoelectric phononic crystal with ...

Archive ouverte: Communication dans un congrès

Tessier, Sarah | 2022-05-23

oral presentation. International audience. This work concerns the propagation of elastic waves in a piezoelectric phononic crystal made of several identical piezoelectric elements separated by electrodes. In such a ...

Impact of aluminum casing on high-frequency transformer leakage inductance ...

Archive ouverte: Communication dans un congrès

Bakri, Reda | 2022-09-05

International audience. High-Frequency (HF) transformer is a central part of isolated HF power converters. Its parameters, in particular leakage inductance and losses, have a significant impact on the overall conver...

Single and coupled Helmholtz resonators for low frequency sound manipulatio...

Archive ouverte: Article de revue

Sabat, R. | 2022-08-14

International audience. In this work, we use the finite element method to study the acoustic properties of single and coupled Helmholtz resonators (HRs). Each HR consists of a sphere drilled with one or several smal...

Optimal Efficiency Control of Synchronous Reluctance Motors-based ANN Consi...

Archive ouverte: Communication dans un congrès

Truong, Phuoc Hoa | 2015-11

This paper presents a new idea by using the Artificial Neural Networks (ANNs) for estimating the parameters of the machine which achieving the maximum efficiency of the Synchronous Reluctance Motor (SynRM). This model take into co...

Three port photonic and plasmonic demultiplexers based on Cross and U-shape...

Archive ouverte: Article de revue

Khattou, S. | 2022-04-21

International audience. We propose the design of three port photonic and plasmonic demultiplexers where filtering toward the two outputs is based on the phenomena of Fano resonances and electromagnetically induced t...

Chargement des enrichissements...